Ubiquiti UniFi Access Door Lock Relay Cable for UA-Hub-Door / UA-Hub-Door-Lite (UACC-Cable-DoorLockR)
Purpose-built OEM relay output cable that connects an electric strike, magnetic lock, or gate operator to the UniFi Access Hub door controller.
The Ubiquiti UniFi Access Door Lock Relay Cable (UACC-Cable-DoorLockR) is a purpose-engineered OEM accessory that connects the relay output of a UniFi Access Hub door controller to an electric strike, magnetic lock, electric latch, or gate operator. The factory-terminated connector on one end mates cleanly with the UniFi Access Hub door / lock port, while the bare-wire end is intended for field termination at the locking device, terminal block, or in-line lock power supply.
By using the OEM relay cable, integrators avoid the field-fabrication time and connector inconsistency of cutting and crimping their own pigtails, and they preserve the documented wiring diagram in the UniFi Access installation guide. The cable's jacket and conductor gauge are sized for typical 12 / 24 V DC locking device current draw and indoor / shielded outdoor installations.
Tightly integrated with the UniFi Access ecosystem, the cable works seamlessly with the UniFi Access Hub controller (UA-Hub-Door, UA-Hub-Door-Lite), Ubiquiti's UA-Lock-Magnetic-540 maglock, the UA-G3-SK-GATE gate starter kit, and any third-party electric strike or maglock that the UniFi Access Hub is configured to drive. The relay output is centrally managed through UniFi Access on UDM Pro, UDM SE, UDM Pro Max, Cloud Key Gen2 Plus, or a dedicated UniFi Access controller.
Ideal for AV / surveillance integrators, low-voltage electricians, IT teams, and facilities groups deploying or refreshing UniFi Access door / gate access points with electric strikes, magnetic locks, electric latches, or commercial gate operators where consistent, OEM relay wiring is required.
Key Features at a Glance
- OEM relay output cable for UniFi Access Hub door controllers.
- Factory-terminated connector on the Access Hub side; bare-wire field termination on the lock side.
- Drives electric strikes, magnetic locks, electric latches, and gate operators per UniFi Access wiring diagram.
- Compatible with the UA-Hub-Door, UA-Hub-Door-Lite, and the broader UniFi Access ecosystem.
- Pairs cleanly with Ubiquiti UA-Lock-Magnetic-540 maglock and the UA-G3-SK-GATE gate starter kit.
- Saves field-fabrication time and reduces installation errors.
- Sized for typical 12 / 24 V DC locking device current draw.
- Preserves Ubiquiti Access Hub warranty when installed as specified.
- 1-year limited Ubiquiti warranty.
Detailed Specifications
| Specification | Detail |
|---|---|
| Manufacturer | Ubiquiti |
| Part / Catalog Number | UACC-Cable-DoorLockR |
| UPC / GTIN | Verify on packaging |
| Product Family | Ubiquiti UniFi Access Cabling Accessories |
| Device Type | Relay Output Cable / Pigtail |
| Color | Black |
| Connector A | OEM keyed connector for UniFi Access Hub door / lock relay port |
| Connector B | Bare-wire / pigtail end for field termination at locking device |
| Compatible Controllers | UniFi Access Hub (UA-Hub-Door), UniFi Access Hub Lite (UA-Hub-Door-Lite), and other Ubiquiti UniFi Access door controllers with matching relay port |
| Compatible Locking Devices | Electric strikes (12 / 24 V DC), magnetic locks (such as UA-Lock-Magnetic-540), electric latches, gate operators with dry-contact input |
| Voltage Rating | 12 / 24 V DC (verify on Ubiquiti datasheet) |
| Conductor Gauge | Verify on Ubiquiti datasheet (typical 18 to 22 AWG for low-voltage relay wiring) |
| Length | Verify on Ubiquiti packaging |
| Jacket | LSZH or PVC indoor jacket (verify on Ubiquiti datasheet) |
| Maximum Current | Per Ubiquiti datasheet; check against the chosen locking device's inrush and holding current |
| Polarity / Wiring | Per Ubiquiti UniFi Access installation guide (NO / NC / COM terminals, plus required diode across the lock for inductive load suppression) |
| Includes | 1 x relay cable assembly |
| Modifies Controller or Lock Housing | No |
| Warranty | 1-year limited Ubiquiti warranty |
| Country of Origin | Confirm with manufacturer (typically China or Vietnam for Ubiquiti accessories) |
| HTS Code | 8544.42.9090 (insulated electric conductors fitted with connectors, other) |
What's in the Box
- 1 x Ubiquiti UniFi Access Door Lock Relay Cable (UACC-Cable-DoorLockR)
- Note: UniFi Access Hub controller (UA-Hub-Door / UA-Hub-Door-Lite) not included.
- Note: Electric strike, magnetic lock (such as UA-Lock-Magnetic-540), or gate operator not included.
- Note: 12 / 24 V DC lock power supply, REX (Request-to-Exit) device, door position sensor, fire alarm tie-in module, and Ethernet cabling sold separately.
- Note: UniFi Access controller (UDM Pro / UDM SE / UDM Pro Max / Cloud Key Gen2 Plus) sold separately.
- Business-ready product sourced for office, retail, and professional environments.
- Compatible with standard procurement and deployment workflows.
- Backed by Single Stop Technologies sales support for sourcing and product questions.
- Brand: Ubiquiti
- SKU: SR2590
Detailed specifications will appear here when included in the product description.
Shipping: Lower 48 U.S. Shipping Only
Returns: 15-day return requests on unopened items only. Customer is responsible for return shipping.
Pricing and availability may change due to current market volatility. Final pricing is confirmed at processing.