Ubiquiti UniFi Protect Camera Junction Box, Recessed Wall Mount Back Box for UniFi Cameras, Black (UACC-Camera-JB-B)
Recessed wall junction box that provides a clean, weather-resistant termination point for UniFi Protect cameras on drywall, masonry, and exterior surfaces.
The Ubiquiti UniFi Protect Camera Junction Box (UACC-Camera-JB-B) is a purpose-engineered OEM back box and wall plate that provides a clean, code-friendly termination point for UniFi Protect cameras. It recesses the camera's wiring and cable strain relief into the wall surface so the camera sits flush against drywall, masonry, or exterior cladding, eliminating the bulky surface-mount appearance of a directly attached camera. A built-in gasket seal and rear cable knockout deliver weather-resistant performance suitable for both indoor and exterior surface installations.
The matte black finish complements UniFi Protect black-finish cameras (such as the UVC-G6-PTZ-B and UVC-AI-PTZ-B PTZ cameras) and other UniFi Protect black-finish hardware for a coherent, low-visibility install. The junction box mates with the OEM mounting pattern on UniFi Protect cameras so warranty coverage and weather sealing are preserved. The internal volume is sized to accept a typical CAT 5e / CAT 6 termination, a service loop, and any required surge protection or weatherproof RJ-45 boot.
Tightly integrated with the UniFi Protect ecosystem, the junction box pairs with UniFi Protect cameras through standard PoE-based UniFi Protect wiring and integrates natively with UniFi Protect running on UDM Pro, UDM SE, UDM Pro Max, Cloud Key Gen2 Plus, UNVR, or UNVR Pro.
Ideal for AV / surveillance integrators, low-voltage electricians, IT teams, and facilities groups installing UniFi Protect cameras on finished interior walls, exterior building facades, glass storefront mullions (with adapter), masonry / brick, parking lot bollards, and any surface where a clean, recessed termination and proper cable strain relief are required.
Key Features at a Glance
- OEM recessed junction box for UniFi Protect cameras.
- Provides a clean, code-friendly termination point on drywall, masonry, and exterior surfaces.
- Built-in gasket seal and rear cable knockout for weather-resistant performance.
- Mates with OEM UniFi Protect camera mounting pattern; warranty preserving.
- Matte black finish complements UVC-G6-PTZ-B, UVC-AI-PTZ-B, and other UniFi Protect black-finish hardware.
- Sized to accept CAT 5e / CAT 6 termination, service loop, and surge protection accessories.
- Improves camera strain relief and reduces field-fabrication time.
- Designed for indoor and exterior surface installations.
- 1-year limited Ubiquiti warranty.
Detailed Specifications
| Specification | Detail |
|---|---|
| Manufacturer | Ubiquiti |
| Part / Catalog Number | UACC-Camera-JB-B |
| UPC / GTIN | Verify on packaging |
| Product Family | Ubiquiti UniFi Protect Mounting Accessories |
| Device Type | Recessed Wall Junction Box / Back Box for Surveillance Camera |
| Color | Black |
| Material | Polycarbonate / ABS housing (verify per Ubiquiti datasheet) |
| Compatible Cameras | Ubiquiti UniFi Protect cameras that follow the standard OEM wall-mount pattern (verify exact camera SKU compatibility against the latest Ubiquiti UACC-Camera-JB-B datasheet before ordering); typical use cases include UniFi G5 / G6 Dome, G5 Bullet, G5 Pro, G6 PTZ (UVC-G6-PTZ-B), and AI PTZ (UVC-AI-PTZ-B) on appropriate mounts |
| Not Compatible | Camera SKUs with unique non-standard mount patterns (such as the AI Theta camera with its swappable lens / audio module ecosystem); verify before ordering |
| Application | Recessed termination point for UniFi Protect cameras on finished walls or exterior surfaces |
| Mount Style | Single-gang or proprietary OEM cutout (verify per Ubiquiti installation template) |
| Cable Pass-Through | Rear knockout for CAT 5e / CAT 6 cable, plus side knockouts for conduit (per Ubiquiti datasheet) |
| Weatherproofing | Indoor and exterior surface use (verify exact IP rating per Ubiquiti datasheet) |
| Includes Hardware | Yes, OEM mounting hardware, gasket, and installation template |
| Modifies Camera Housing | No |
| Product Dimensions | Confirm on Ubiquiti datasheet |
| Product Weight | Confirm on Ubiquiti datasheet |
| Certifications | Verify on packaging (RoHS) |
| Warranty | 1-year limited Ubiquiti warranty |
| Country of Origin | Confirm with manufacturer (typically China or Vietnam for Ubiquiti accessories) |
| HTS Code | 8529.90.9900 (parts suitable for use solely or principally with the apparatus of headings 8525 to 8528) |
What's in the Box
- 1 x Ubiquiti UniFi Protect Camera Junction Box (UACC-Camera-JB-B)
- 1 x Gasket / weather seal
- Mounting hardware (per Ubiquiti packaging)
- Installation template and documentation
- Note: UniFi Protect camera not included.
- Note: PoE switch / PoE injector, network cabling, weatherproof RJ-45 connectors, surge protection, and UniFi Protect NVR (UDM Pro / UDM SE / UDM Pro Max / Cloud Key Gen2 Plus / UNVR / UNVR Pro) sold separately.
- Business-ready product sourced for office, retail, and professional environments.
- Compatible with standard procurement and deployment workflows.
- Backed by Single Stop Technologies sales support for sourcing and product questions.
- Brand: Ubiquiti
- SKU: SQ2738
Detailed specifications will appear here when included in the product description.
Shipping: Lower 48 U.S. Shipping Only
Returns: 15-day return requests on unopened items only. Customer is responsible for return shipping.
Pricing and availability may change due to current market volatility. Final pricing is confirmed at processing.