Ubiquiti UniFi Uplink SFP28 25G Direct Attach Copper Cable, 5.91 in (0.15 m), Twinax DAC, Passive (UACC-Uplink-SFP28-0.15M)
A compact 0.15-meter SFP28 25G direct attach copper (DAC) cable, designed for adjacent rack-mount UniFi switch uplinks where fiber is overkill and 1G/10G is too slow.
The Ubiquiti UniFi Uplink SFP28 0.15 M DAC Cable (UACC-Uplink-SFP28-0.15M) is a 5.91-inch (15 cm / 0.15 m) passive twinaxial copper direct attach cable terminated with SFP28 connectors on both ends, engineered to provide a 25 Gbps SFP28 interconnect between two adjacent UniFi switches or between a switch and a 25G-capable router or server. Direct attach copper (DAC) cabling is the cleanest and lowest-cost option for short, side-by-side rack interconnects: it eliminates the need for two separate SFP28 optics and a fiber patch cable, draws minimal power, runs cooler than fiber transceivers, and ships ready to plug and play with zero configuration.
The 0.15 m length is purpose-built for direct port-to-port interconnects in a single 1U or 2U rack-mount install, where two switches sit immediately above and below each other (or a switch and a router / server share the same rack-mount level). At this short distance, DAC is the dominant industry choice over fiber: lower cost, lower latency, lower power draw, no separate optic to fail, and no fiber patch cable to manage. The cable is SFP28 MSA-compliant and backward compatible with SFP+ 10G host ports, so it can also be used in 10G aggregation scenarios where the customer wants a single cable to handle both today's 10G uplink and tomorrow's 25G upgrade.
Ideal for stacked UniFi switch uplinks (USW-Pro-HD-24, USW-Pro-Max-24-PoE, USW-Aggregation, USW-EnterpriseXG-24, and any other 25G/10G SFP28-equipped UniFi switch), aggregation-layer interconnects, 25G server / NAS direct connects, and any short-reach 25G rack install where the customer wants a clean single-cable interconnect without separate optics.
Key Features at a Glance
- 25 Gbps SFP28 direct attach copper (DAC) cable for high-throughput rack interconnects.
- 5.91 in (15 cm / 0.15 m) length optimized for adjacent rack-mount switch and server interconnects.
- Passive twinaxial copper construction: no power draw beyond the host port's normal SFP28 power budget.
- SFP28 MSA-compliant connectors on both ends; backward compatible with 10G SFP+ host ports.
- Standards-compliant interoperability with UniFi, EdgeMAX, and standards-based third-party switches and servers.
- No external power, fiber optic, or transceiver required; plug-and-play install.
- Lower cost, lower latency, lower power draw, and lower failure surface than equivalent 25G optical SFP28 + fiber patch cable.
- Hot-swappable for fast deployment, maintenance, and field replacement.
- Backed by Ubiquiti's limited 1-Year Manufacturer Warranty.
Detailed Specifications
| Specification | Detail |
|---|---|
| Manufacturer | Ubiquiti Inc. |
| Part / Catalog Number | UACC-Uplink-SFP28-0.15M |
| Product Line | UniFi SFP & Fiber |
| Product Name | UniFi Uplink SFP28 25G DAC Cable, 0.15 M |
| Product Type | Direct Attach Copper (DAC) Cable, SFP28 to SFP28 |
| UPC / GTIN | Verify on packaging |
| UNSPSC | 26121611 |
| Form Factor | SFP28 to SFP28 (passive twinaxial copper) |
| Connector Type | 2 x SFP28 |
| Supported Data Rate | 25 Gbps (also supports 10 Gbps when paired with SFP+ host ports for backward-compatible operation) |
| Standards Alignment | SFP28 MSA, 25GBASE-CR; backward compatible with SFP+ 10GBASE-CR |
| Cable Length | 5.91 in (15 cm / 0.15 m) |
| Cable Type | Passive twinaxial copper |
| Max Power Consumption | 0 W (passive; no DAC-side draw beyond the host port's normal SFP28 power budget) |
| Ambient Operating Temperature | Verify with current Ubiquiti datasheet (typical 32 to 158 degrees F / 0 to 70 degrees C) |
| Hot-Swappable | Yes |
| Compatibility | Ubiquiti UniFi, EdgeMAX, and EdgeRouter SFP28 / SFP+ ports; standards-compliant SFP28 / SFP+ host ports on third-party switches and servers |
| Certifications | RoHS; CE; FCC (Verify with current Ubiquiti datasheet) |
| Warranty | Limited 1-Year Manufacturer Warranty |
| Country of Origin | China (verify on packaging) |
| HTS Code | 8544.42.9090 (other electric conductors fitted with connectors, for a voltage not exceeding 1,000 V) |
What's in the Box
- 1 x Ubiquiti UniFi Uplink SFP28 25G DAC Cable, 0.15 M (UACC-Uplink-SFP28-0.15M)
- 1 x Quick start / product documentation
- Note: Cable is sold individually; multi-packs may be listed under separate Ubiquiti part numbers
- Business-ready product sourced for office, retail, and professional environments.
- Compatible with standard procurement and deployment workflows.
- Backed by Single Stop Technologies sales support for sourcing and product questions.
- Brand: Ubiquiti
- SKU: S98137
Detailed specifications will appear here when included in the product description.
Shipping: Lower 48 U.S. Shipping Only
Returns: 15-day return requests on unopened items only. Customer is responsible for return shipping.
Pricing and availability may change due to current market volatility. Final pricing is confirmed at processing.